Official Marshmallow VFD600 Firmware For Vodafone Smart Prime 7

[Custom Rom] Full Stable AOSP Android 7ROMfor Lenovo A536

Guide To Install:-

Download “ aosp_7.1.1_apollo_lite_***.zip ” and copy it to external memory.
Turn off your phone and enter recovery mode by Volume Down + Power Key at the same time.
Then ‘ wipe and format option ⇒ wipe data, system, cache and Dalvik cache ’ via recovery.
Back to recovery menu and click install.
Then navigate to the Rom.zip file, which you downloaded before.
Select aosp_7.1.1_apollo_lite_***.zip file from the list to flash it.
Swipe for flashing.
Wait for processing complete.
After the process is done again flash Gapps file (same step) and wipe caches.
Then Reboot your device & enjoy.

Note: – The first time it’s takes 5-7 minutes to boot.

Source: – Xda

The post Install Android 7.1.1 AOSP Nougat For Vernee Apollo Lite appeared first on GizRom.com.

Guide To Install Custom Lollipop 5.0 Rom For Lenovo A536

Everyone always wants to update their old smartphone to the new android versions. For them, this is the post about Lollipop 5.0 Rom For Lenovo A536. Lenovo stopped updating these old devices, Lenovo A536 is one of them. This phone didn’t get any updates after the stock UI Kitkat.

This is the custom ROM for Lenovo A536. This ROM is based on Android 5.0 Lollipop is the one of then latest android version now. This ROM is fully customized with latest android apps. Firmware 5.0 based on 3.10.54 kernel.

In September of 2014, Lenovo Released this budget smartphone. This device is powered by 1.3GHz quad-core MediaTek MTK 6582 processor. The Lenovo A536 has 5.0-inch Capacitive touchscreen, 16M colors display. The resolution and PPI(pixel per inch) of this phone are 480 x 854 pixels and 196 PPI, and android version 4.2.2 Kitkat. The A536 is powered by 1GB of ram and 8GB of internal memory. It also allows you to add external storage up to 32GB Sd card slot. It has Removable Li-Po 2000 mAh battery, the sensors of Lenovo A536 are Accelerometer and proximity.

ROM Features:-

Based On Android Lollipop 5.0
Custom ROM
Prerooted
Optimized Interface
Kernel Version 3.10.54

_Screenshot_

lenovo a536 lollipop 5 0 - Guide To Install Custom Lollipop 5.0 Rom For Lenovo A536

Preparations:-

Install Twrp Recovery Mode, Guide>>
Backup your current ROM and data.
Charge your phone up to 70 %.
Download ROM zip file and gapps.

⇓⇓Download Lollipop 5.0 And Gapps⇓⇓

Lollipop_5_0.zip

Gapps.zip

PATCHES:-

For Lollipop ROM, Here>
Connection/disconnection headphones and fix photos with flash, Here>
Front camera and auto-rotation issue, Here>
Only auto-rotation issue, Here>
Issue with Front camera, Here>

Guide To Install:-

Go to Recovery Mode.
Turn Off Your Phone And Enter Recovery Mode By Volume UP+ Power Key At The Same Time.
In recovery Select ‘Wipe And Format Option ⇒Wipe Data, Cache And Dalvik Cache’ Via Custom Recovery.
Go to install option and navigate “Lollipop_5_0.zip“.
And swipe to start the update, and wait it can take a while.
For Update Patches, Go to install option and select install image file, and navigate patch img file.

Source: – Xda

You Might Also Like:-

Guide To Install AOSP 6.0 Marshmallow ROM For Redmi Note 4

Unofficial ResurrectionRemix Android 6.0.1 ROM For Honor 5X

The post Guide To Install Custom Lollipop 5.0 Rom For Lenovo A536 appeared first on GizRom.com.

Official LineageOs 14.1 Rom For Moto G4 And G4 Plus

Moto Launched their two new impressive smartphones few days age. Moto Launched Moto G4 and Moto G4 Plus. This is the post about Official LineageOs 14.1 Rom for Moto G4 and Moto G4 plus.

As all of you know that Cyanogenmod is now dead, now CyanogenMod has become LineageOS. Many smartphones already started receiving LineageOS 14.1 updates. This Ram management is obviously better than stock UI. Everyone wants to have a customized android version experience, and lineageOS is one of the best android custom ROM. The Lineage OS have to better protections for your smartphone and for your privacy. For LineageOS users their device will have the quick boot, superuser and tune audio, and more cool apps. This Lineage OS having a better battery improvement than any other custom ROMs, it is a light ROM for all smartphones. This Rom has more optimizations more customizations and everything is more for this ROM user, and its looks very cool and it is very easy to use. You always better to update your ROM to Lineage OS 14.1 Custom ROM.

Moto G4 And Moto G4 Plus:-

The Moto G4 and Moto G4 Plus these devices are too similar to each other. These two devices have 5.5 inches IPS LCD capacitive touchscreen display with the resolution and PPI of 1080 x 1920 pixels and PPI of 401. This device is running on Android 6.1 Marshmallow and upgradable to Android 7.0 Nougat. The both device powered by Octa-core (4×1.5 GHz Cortex-A53 & 4×1.2 GHz Cortex-A53) Qualcomm MSM8952 Snapdragon 617. The Moto G4 has 2 GB of RAM and 16/32 GB of internal memory, as followed by the Moto G4 Plus has three variants like 2 GB of RAM and 16 GB of internal memory, 3 GB of RAM and 32 GB of Internal memory & 4 GB of RAM and 64 GB of Internal Memory.

LineageOs 14.1 ROM Features:-

More customizations
Optimized
Battery performance increase
Smooth Interface
More apps

Preparations:-

Install TWRP or any custom recovery, Guide>
Unlock bootloader, Guide>
Backup your current ROM and data
Charge your phone up to 50%
Download LineageOs and Gapps
Follow the guide to install

⇓⇓ DOWNLOAD LINEAGEOS 14.1 AND GAPPS ⇓⇓

LineageOs14_1.zip

Gapps.zip

Guide To Install:-

Download ROM file and copy it to internal storage.
Turn off your phone and enter Recovery Mode by Volume Down + Power Key at the same time.
Fast mount the partitions: Data, Cache, System.
Then ‘ wipe and format option ⇒ wipe data, system, cache and Dalvik cache ’ Via Custom Recovery.
Now navigate the LineageOS 14_1.zip ROM file and flash it.
And then swipe for start flashing.
After that, flash gapps.zip file as the same method of flashing ROM (dont wipe or format anything).

Note: – The first time it’s takes 5-7 minutes to boot.

Enjoy LineageOS 14.1 Rom for MOTO G4 OR G4 PLUS, please share your experience by comment … 🙂 🙂 🙂

Source:- XDA

Unofficial CyanogenMod 12.1 ROM For BLUBOO Xtouch – X500

The CyanogenMod 12.1 was announced on 16th April 2015. This ROM is based on Android 5.1 Lollipop. It is a better version of Android OS. It is more stable, faster and smoother ROM than stock. This interface allows you to do more customization with your android smartphone. This is the perfect ROM for those users who always love to customize their AndroidSmartphones. In CyanogenMod 12.1 ROM its increases the battery performance. This ROM is one of my favorite ROMS that I know. I always preferred CyanogenMod ROM. This Is the Post about Unofficial CyanogenMod 12.1 ROM For BLUBOO Xtouch – X500.

BLUBOO Xtouch – X500 is a newly launched smartphone. This phone got some good stuff, like 5-inch screen, 3GB of ram 32GB of internal. 13 Megapixel of rear camera and 8 megapixels of front camera. This phone runs on MTK6735 Octa core processor. The BLUBOO Xtouch – X500 Is powered by 3000 mAh battery.

CyanogenMod 12.1 ROM Features:-

Optimised
More customization
New apps
Camera
Battery performance increased
And much more

Bugs:-

Fingerprint

Preparations:-

Install Custom Recovery.
Charge your phone up to 50%.
Backup your current ROM and data.
Download the ROM and gapps file.
Follow the guide to install.

⇓⇓DOWNLOAD CYANOGENMOD 12.1 AND GAPPS ⇓⇓

cm-12.1-20161207-UNOFFICIAL-FINAL-Xtouch-by_lopestom.zip

gapps.zip

Guide to Install:-

Reboot to custom recovery.
Turn off your phone and enter Recovery Mode by Volume Down + Power Key at the same time.
In Recovery Go To ‘Wipe And Format Option ⇒Wipe Data, System, Cache And Dalvik Cache Via Custom Recovery.
Not navigate the ”cm-12.1-20161207-UNOFFICIAL-FINAL-Xtouch-by_lopestom.zip” ROM file and flash it.
Swipe to start flashing.
Do the same method to install gapps(don’t wipe or format anything).

Note: – The first time it’s takes 5-7 minutes to boot.

Enjoy New ROM For Your BLUBOO Xtouch – X500, please share your experience by comment … 🙂 🙂 🙂

Source: – XDA

Unofficial EMUI 3.0 Custom ROM For Micromax Canvas Xpress 2

This is the EMUI 3.0 custom ROM for Micromax canvas Xpress 2. EMUI is the interface of Huawei and Honor smartphones, and this is the personally my best smartphone’s interface that I ever knew. It is a very fast and smooth user interface, it has more privacy settings, more customizations, and more smart gestures.

The Micromax Canvas Xpress 2 runs on stock android version, so it is always better idea to upgrade your user interface to EMUI 3.0. It makes your smartphone faster and smoother than the stock Interface. EMUI 3.0 has its own security that gives you to save more power, app lock, block contract and much more.

In August 2015, Micromax launched Micromax Canvas Xpress 2, this is a budget smartphone. It has 1 GB of RAM and 8 GB of internal memory, it also has 5 inches display with 720 x 1280 resolution. The Canvas Xpress 2 has 13 MP of rear camera and 2 M of front camera. This phone is powered by 2500 mAh battery and its runs on Android 4.4.2 Kitkat.

Features of EMUI 3.0:-

All sensors are working.
Better Focus on camera
Battery performance increased.
Based on Android 4.4 Kitkat
Pre-rooted by SuperSU.
And much more.

Screenshot

EMUI 3.0 Custom ROM For Micromax Canvas Xpress 2 4 150x150 - Unofficial EMUI 3.0 Custom ROM For Micromax Canvas Xpress 2

EMUI 3.0 Custom ROM For Micromax Canvas Xpress 2 2 150x150 - Unofficial EMUI 3.0 Custom ROM For Micromax Canvas Xpress 2

EMUI 3.0 Custom ROM For Micromax Canvas Xpress 2 3 150x150 - Unofficial EMUI 3.0 Custom ROM For Micromax Canvas Xpress 2

EMUI 3.0 Custom ROM For Micromax Canvas Xpress 2 5 150x150 - Unofficial EMUI 3.0 Custom ROM For Micromax Canvas Xpress 2

EMUI 3.0 Custom ROM For Micromax Canvas Xpress 2 6 150x150 - Unofficial EMUI 3.0 Custom ROM For Micromax Canvas Xpress 2

EMUI 3.0 Custom ROM For Micromax Canvas Xpress 2 1 150x150 - Unofficial EMUI 3.0 Custom ROM For Micromax Canvas Xpress 2

Preparations:-

Download the E313_EMUI_3.0.zip file.
Backup your current ROM and all important data.
charge your phone up to 50 % for installing this ROM.
Install custom recovery > Guide
Follow the instructions carefully.

⇓⇓ DOWNLOAD EMUI 3.0 For Micromax Canvas Xpress 2 ⇓⇓

E313_EMUI_3.0.zip

Guide To Install:-

First of all, go In Recovery Mode By Pressing Volume Up + Power Button at the same time.
In Recovery Go To ‘Wipe And Format Option ⇒Wipe Data, System, Cache And Dalvik Cache Via Custom Recovery.
Now navigate ”E313_EMUI_3.0.zip” and flash it.
Then wait for a while.
After complete reboot your device and enjoy EMUI 5.0 For Micromax Canvas Xpress 2.

Note: – The first time it’s takes 5-10 minutes to boot.

Enjoy EMUI 3.0 For Micromax Canvas Xpress 2, please share your experience by comment … 🙂 🙂 🙂

Source: – XDA

G935PVPU4BQAA Android 7.0 Firmware For Galaxy S7 Edge SM-G935P [Sprint]

Samsung already releases nougat ROM on their smartphones. Some day ago officially launched latest G935PVPU4BQAA firmware. Many users aren’t able to update their device in nougat. Today we share with you G935PVPU4BQAA Android 7.0 Firmware for Galaxy S7 Edge SM-G935P [Sprint]. That is an official stock update. Enjoy via this update some exclusive features that came with Android Nougat update.

Samsung Released Samsung Galaxy S7 Edge SM-G935P [Sprint] smartphone with Android v6.0 (Marshmallow). It’s a big budget smartphone in the market in India and another country. Galaxy S7 Edge runs 1.6GHz octa-core it comes with 4GB of RAM. This both device has 32 GB internal storage and supported MicroSD up to 200 GB.

Galaxy S7 Edge has 5.5 inches Super AMOLED capacitive touchscreen with a resolution of 1440 x 2560 pixels display. Both phones let you snap 12-megapixel rare camera for photo & 5-megapixel front Camara for the selfie. Sensors in the phone include Compass Magnetometer, Proximity sensor, Accelerometer, Ambient light sensor, and Gyroscope.

This update also changed Multiwindow, New Messaging Apps, Improved Notifications, along with other some other new features. With main things that new stylish app drawer and App standby feature that stops most background services and network connection when they are not in use. If your device has been rooted or modified, or your outside in the US, then you update your device by manually flash via Odin. So, let’s go and read the instruction carefully.

Firmware Information:-

Version: – Android 7.0 (Nougat)
Galaxy S7 Edge: – SM-G935P
PDA: – G935PVPU4BQAA
Kernel version:- 3.18.31-10318693
Date:- 01.Feb.2017

Pre-requisites :-

First of all enable USB Debugging on your device, a step below:

Open settings ⇒ developer options. The developer options are hidden by default. To enable the developer options, select settings ⇒ about the phone and tap build number seven times. Now open developer options ⇒ enable USB debugging option.

Now Enable OEM Unlock on your device, the step below:

Open settings ⇒ developer options ⇒ enable OEM unlocking.

Download and Install Kies From Here.
Download Odin Tool From Here.
Read Instructions carefully.

⇓⇓ Download G935PVPU4BQAA Android 7.0 Firmware for Galaxy S7 Edge SM-G935P ⇓⇓

G935PVPU4BQAA For Galaxy S7 Edge

Guide To Install:-

Fast extract Odin.zip & Firmware.zip.
Then run Odin.exe into the extracted folder.
Then switch off your phone.
Next turn to download mode by holding Volume Down + Home + Power.
Then connect your phone to PC.
Odin will automatically detect your device.
Then click the PDA box, add choose extracted in the fast step firmware compression.
Check auto reboot and F.Reset time options.
See the screenshot >

Then click the start button to start the installation process.
After the process completes finally, reboot your device and enjoy.

Note: – The first time it takes 5-10 minutes to boot.

If you want a more new update then browse our firmware selection tab, either subscribe our blog … 🙂 🙂 🙂

The post G935PVPU4BQAA Android 7.0 Firmware For Galaxy S7 Edge SM-G935P [Sprint] appeared first on GizRom.com.

nitya jana

Update B330 EMUI 5.0 Huawei Nova Nougat Firmware [Middle East]

Some day ago Huawei already started rolling out emui 5.0 android nougat for their old devices. Latest nougat firmware is now available for Huawei nova. This is official beta version full firmware with CUST file. Today we share with you B330 emui 5.0 Huawei nova nougat firmware for the middle east variant device. Let’s talk about the device.

September 2016, Huawei launched Huawei nova in Germany. The Huawei nova powered by 2ghz octa-core Qualcomm snapdragon 625 processor. This device comes with 3GB of RAM. This device has 32gb of internal storage that can be expanded up to 128 GB via a MicroSD. It has 5.0 inches IPS LCD capacitive touchscreen, 16m colors, with a resolution of 1080 x 1920 pixels. This device lets you snap brilliant 12-megapixel photos and 8-megapixel. It weighs 146.00 grams. It has a non-removable Li-Po 3020mah battery.

B330 EMUI 5.0 Huawei Nova nougat firmware is now available with latest build B330 version. Many users asking when Huawei release emui 5.0 for Huawei nova, maybe the middle of the April Huawei officially launch stable version. Here the guide and B330 firmware link for Huawei Nova CAN-L11 middle east version. So don’t wait if you want to update emui 5.0 just scroll down and follow the guide, …

Firmware Details:-

Android Version: – Nougat v7.0
UI Version: – Emotion UI 5.0
Firmware Versions: – B330
Huawei Nova: – CAN-L11
Release Date:- 15.Mar.2017
Firmware: – CAN-L11C185B330
Status : – Official
Region : – Middle East
Size : –
- Update.zip:-1.6 GB
- CUST file:- 813 MB

Warning: – This is an early build of EMUI 5.0 for Huawei nova. That’s why it appears to be having some issues.

Preparation :-

Backup complete phone data like contacts, messages, and apps.
Your device at least needs to 50-60% charge for this process.
Check your model number and CUST number before flashing.

⇓⇓ Download B330 Huawei Nova Nougat Firmware ⇓⇓

update_data_full_CAN-L11_hw_meafnaf.zip

Guide To Install:-

For stock recovery:
- Download Full package ROM (update.zip) and update_data_full_CAN-L11_hw_meafnaf.zip file.
- Extract both zip files.
- Create a folder “dload” to the root of the SDcard.
- Copy all data including the update.app file in the “dload” folder.
- Open dial pad type “ *#*# 2846579#*# * ”.
- Select software upgrade > SDcard upgrade > confirm the installation.
- Flashing will start. after flashing process did your phone automatic reboot.
For TWRP recovery:
- Install TWRP recovery.
- Download ” update.zip ” and “ update_data_full_CAN-L11_hw_meafnaf.zip ” & copy both files to SDcard of the phone.
- Turn off your phone and enter recovery mode by volume up + power key at the same time.
- In the main menu select “Install“.
- First chose internal storage or SDcard in browse selection.
- Then navigate to the file, which you downloaded before.
- Select ” update.zip ” file from the list to flash it.
- After the process is done, don’t reboot again flash update_data_full_VNS-***_hw_meafnaf.zip file.
- Wait for the installation to complete and then reboot your device & enjoy.

Note: – The fast time it’s takes 5-10 minutes to boot.

If face any problem in flashing this firmware, then comments below…..

The post Update B330 EMUI 5.0 Huawei Nova Nougat Firmware [Middle East] appeared first on GizRom.com.

Ayan sahana

Install Android 6.0.1 BLISS POP ROM For Lenovo Vibe C

Bliss ROM is a custom ROM. This post is about the Android 6.0.1 BLISS POP ROM For Lenovo Vibe C. This ROM is based on Android 6.0.1 Marshmallow. According to Bliss POP, they offer the most features of and other ROM. BLISS POP is open source ROM. BLISS pop Allows you to do more customizations like apps circle and much more. This ROM also comes with the VIPER4android Audio system. This ROM also more light, handier and gives you more free space.

Features Of BLISS POP:-

Based on Android 6.0.1 marshmallow.
Pre-rooted.
OmniSwitch.
CM13 theme engine.
Gesture anywhere.
Slim animations.
Custom color tile options in the notification drawer.
And much more.

SCREENSHOTS

bliss rom 1 150x150 - Install Android 6.0.1 BLISS POP ROM For Lenovo Vibe C

bliss rom 2 150x150 - Install Android 6.0.1 BLISS POP ROM For Lenovo Vibe C

bliss rom 3 150x150 - Install Android 6.0.1 BLISS POP ROM For Lenovo Vibe C

bliss rom 4 150x150 - Install Android 6.0.1 BLISS POP ROM For Lenovo Vibe C

Preparations:-

Backup your current ROM and all important data.
Need your device must be rooted.
Unlock Bootloader of your device.
Install TWRP custom recovery for this process.
Download bliss_rom.zip and gapps file.
Charge your phone up to 50% for this flashing process.
Follow the guide carefully to install this ROM.
The short step to install this ROM:
- Developer Mode > Root > UBL> TWRP > Install Rom > Gapps
- Full guide: click Here.

⇓⇓ Download BLISS POP ROM ⇓⇓

BlissROM.zip

Guide to install:-

Download blissROM.zip and gapps file.
Then Copy both files into SDcard of your phone.
Now Turn off your device and go to custom recovery mode.
- By holding Volume up + Power button at the same time.
In recovery menu select and clean ” Wipe and format option ⇒ Wipe data, System, Cache and Dalvik cache “.
Then browse the BlissROM.zip that you download before, and then flash the ROM file.
Do the same method for flashing gapps. [just don’t wipe or format anything for gapps flashing]
Now wait a while, let the device reboot.
Then enjoy the Android 6.0.1 BLISS POP ROM for Lenovo Vibe C.

Note: – The first time it’s takes 8-12 minutes to boot.

If you facing any problem, let us know we will happy to help you 🙂 🙂 🙂

Source : – XDA

Stock Android 7.1.1 Oxygen OS 4.1.0 For OnePlus 3T [OTA and Full ROM]

OnePlus finally released Oxygen OS 4.1.0 that comes with android 7.1.1 nougat, after many open beta tests. this Oxygen OS 4.1.0 for OnePlus 3T device, that comes via OTA and full ROM. Some day ago OnePlus released a weekly update of Android 7.0 OxygenOS 4.0 OxygenOS 4.0.3 for OnePlus 3T. This update brings the latest security patch with AOSP 7.1.1 sources.

OnePlus 3T launched in November 2016 with Android 6.0.1 (Marshmallow) OnePlus promise that they will give Android nougat update for OnePlus 3T. After many beta tests finally, yesterday OnePlus share Oxygen OS 4.1.0 android 7.1.1 update. Now time to fix some major bugs so OnePlus forum released the Oxygen OS 4.1.0 for OnePlus 3T.

They fix many bugs and add some new changelog that you see below in the changelog section. However, who don’t get this update, they follow the step, download OTA or full ROM and update device easily. This OTA update completely flashes manually by stock recovery and full ROM flashes manually by TWRP recovery. If you can’t find the OTA, then download and update the OnePlus phone using the built in System updates option in Settings. OnePlus gives this update only Germany or Canada region, so if you use a VPN app like Opera VPN app then you get this OTA update directly in System update app.

Oxygen OS 4.1.0 changelog:-

Upgraded Android 7.1.1
Improved picture taking of moving objects with blur reduction.
Updated Google security patch to 1st March 2017.
Improved video stability when recording.
Added expanded screenshots.
Improved WiFi connectivity.
Improved Bluetooth connectivity.
General bug fixes.

⇓⇓Download Android 7.1.1 Oxygen OS 4.1.0 for OnePlus 3T⇓⇓

OTA ⇒ Oxygen OS 4.0.3 > 4.1.0 OTA / Mirror

Full ROM ⇒ OOS 4.1.0 full stock firmware for OP 3T

Install OTA by stock recovery:-

For flashing this OTA update, your device must be running on OxygenOS 4.0.3 version.
If you already updated then you can install this update stock recovery via ADB sideload or install from SD Card option.

Install Full ROM by TWRP:-

At first Take Apps, Message, Contact Backup.
Download the OxygenOS 4.1.0 ROM zip and copy it to phone internal storage root.
Turn Off Your Phone.
Then Reboot into recovery by pressing Power + Volume down button, then select English.
Now select Wipe Data and Cache.
Next, install from Local.
Then Select the OxygenOS 4.1.0 zip and flash it.
Wait for complete the process.
At last, Reboot your device and enjoy Android 7.1.1 Oxygen OS 4.1.0 for OnePlus 3T.

If you want more latest android updates and any custom ROM then subscribe our newsletter … 🙂 🙂 🙂

The post Stock Android 7.1.1 Oxygen OS 4.1.0 For OnePlus 3T [OTA and Full ROM] appeared first on GizRom.com.

Update EMUI 5.0 Huawei Mate 9 B176 Nougat Firmware [Europe]

On this week Huawei sends a new update on Huawei Mate 9. The version of this latest nougat update is B176. Latest B176 nougat firmware is now available for Huawei Mate 9. We provide official full firmware with CUST file. Today we share with you EMUI 5.0 Huawei Mate 9 B176 nougat firmware for the European variant device. Let’s some talk about the device.

November 2016, Huawei launched Huawei Mate 9 in global smartphone market. The Huawei Mate 9 powered by 1.8GHz octa-core HiSilicon Kirin 960 processor. This device comes with 4 GB of RAM. This device has 64 GB of internal storage that can be expanded up to 256 GB via a MicroSD. It has 5.9 inches IPS LCD capacitive touchscreen, 16M colors, with 1080 x 1920 pixels resolution. This device lets you snap brilliant Dual 20 MP +12 MP rare camera for taken a good quality picture and 8-megapixel front camera for perfect selfie. It weights 190.00 grams. It has a non-removable Li-Po 4000 mAh battery.

This update brings many new changelogs with 6x zoom, which enables you to take clearer photos from a distance. Many users do not get this update officially on their device, so if you want to update your device then you come in right place. Here the guide and B176 firmware link for Huawei Mate 9 MHA-L09 / MHA-L29 European version. So don’t wait if you want to update emui 5.0 just scroll down and follow the guide, …

Firmware Details:-

Android Version: – Nougat v7.0
UI Version: – Emotion UI 5.0
Firmware Versions: – B176
Huawei Mate 9: – MHA-L09 / MHA-L29
Release Date:- 13.Mar.2017
Firmware : – MHA-L09C432B176 / MHA-L29C432B176
Status: – Official
Region: – Europe.
Changelog: – Click here.

Note :-

This firmware work only Huawei Mate 9 MHA-L09 / MHA-L29 variant, do not try other version devices.

Preparation :-

At first, check your device model number.
Backup complete phone data like contacts, messages, and apps.
Your device at least needs To 60% charge for flashing.

⇓⇓ Download EMUI 5.0 Huawei Mate 9 B176 Nougat Firmware ⇓⇓

Only For MHA-L09

update_full_hw_eu.zip

Only For MHA-L29

update_full_hw_eu.zip

Guide To Install Update:-

Download Update.zip File.
Extract file.
Create ” dload ” folder to root of the SDcard.
Copy ” UPDATE.APP ” into the ” dload ” folder.
Switch off your device, now hold Volume up + Volume down + Power for a few seconds to start the installation.
Flashing will start. After flashing done your phone automatic reboot.

Guide To Install EU Cust:-

Download ” update_full_hw_eu.zip ” file.
Extract file.
Delete the previous UPDATE.APP file from ” dload ” folder.
Now copy ” UPDATE.APP with some other files ” into the ” dload ” folder.
Then switch off your device, now hold Volume up + Volume down + Power for a few seconds to start the installation.
Flashing will start. After flashing done your phone automatic reboot.

Note: – The fast time it’s takes 5-10 minutes to boot.

For a more latest update please like our Facebook and other social pages… 🙂 🙂 🙂

The post Update EMUI 5.0 Huawei Mate 9 B176 Nougat Firmware [Europe] appeared first on GizRom.com.

N920CXXU3CQC7 for Galaxy Note 5

Download Official Galaxy Note 5 Android 7.0 Nougat Firmware [N920C] [All Regions]

Samsung ready to give nougat update on Samsung Galaxy Note 5, as promised. Officially Samsung launched the latest N920CXXU3CQC7 Galaxy Note 5 Android 7.0 Nougat Firmware for all regions device. This update based on the latest 1-march-2017 security patch level from AOSP. If you don’t update your device then flash this version of firmware that updates your device to nougat.

Samsung Released Galaxy Note 5 smartphone with Android v6.0.1 (Marshmallow). Samsung Galaxy Note 5 devices run 1.5GHz octa-core Exynos 7420 processor and it comes with 4GB of RAM. This device has 32/64/128 GB GB. Samsung Galaxy Note 5 has 5.7 inches Super AMOLED capacitive touchscreen with a resolution of 1440 x 2560 pixels display. This device lets you snap 16-megapixel rare camera and 5-megapixel front camera.

This update brings the new User experience design and various performance upgrades to the Note 5 SM-N920C. We share below full changelog about this firmware. The latest build of nougat QB9 in now available this firmware comes with latest N920CXXU3CQC7 PDA and N920CXXU3CQBB CSC build of nougat. See some screenshot below:

Galaxy Note 5 Android 7.0 Nougat 150x150 - Download Official Galaxy Note 5 Android 7.0 Nougat Firmware [N920C] [All Regions]

For more screenshots : http://imgur.com/a/IC8K5

Full Odin flashable firmware is now available for the N920C all regions device. If you want to update your device then, first check device model number and country code. Go down and download Odin tool and your country based Galaxy Note 5 nougat firmware. Read the instruction carefully.

Firmware Information:-

Version: – Android v7.0 [Nougat]
Device: – Galaxy Note 5
Model number: – SM-N920C
Country: – All Regions (updating)
Security Patch Level:- 01-03-2017
PDA: – N920CXXU3CQC7
Changelog:-
- Based on Android 7.0 Nougat.
- Provides new User experience design.
- various performance modes.
- Efficient space for installation of downloaded apps.
- Improved speed of app installation.

Pre-requisites :-

First of all enable USB Debugging on your device, a step below:

Now Enable OEM Unlock on your device, the step below:

Open settings ⇒ developer options ⇒ enable OEM unlocking.

Download and Install Kies From Here.
Download Odin Tool From Here.
Read Instructions carefully.

⇓⇓ Download Galaxy Note 5 Android 7.0 Nougat Firmware ⇓⇓

All Regions firmware link

Mirror (sammobile)

Note: If you want full speed download link then comment below with your firmware link.

Turkey Regions (TUR)

N920CXXU3CQC7 for Galaxy Note 5 (TUR)

United Arab Emirates (XSG)

N920CXXU3CQC7 for Galaxy Note 5 (XSG)

United Arab Emirates (LYS)

N920CXXU3CQC7 for Galaxy Note 5 (LYS)

Guide To Install:-

Select your region and download firmware file.
Fast extract Odin.zip and firmware.zip.
Then run Odin.exe into the extracted folder.
Then switch off your phone.
Next turn to download mode by holding Volume Down + Home + Power.
Then connect your phone to PC.
Odin will automatically detect your device.
Then click the PDA box, add choose extracted in the fast step firmware compression.
Check auto reboot and F.Reset time options.
See the screenshot >

Then click the start button to start the installation process.
After the process completes finally, reboot your device and enjoy.

Note: – First time it takes 5-10 minutes to boot.

If you like my post please share with your friends on social and if face any problem then comment below … 🙂 🙂 🙂

Source: xda

The post Download Official Galaxy Note 5 Android 7.0 Nougat Firmware [N920C] [All Regions] appeared first on GizRom.com.

RR-N-v5.8.2-20170318-hltespr-Official.zip

Resurrection Remix-N v5.8.2 Nougat ROM For Galaxy Note 3 SM-N900P

Samsung Galaxy Note 3 was launched in September 2013. The Galaxy Note 3 doesn’t receive nougat update from Samsung. The manufacturer has many popular in worldwide. So one developer builds Resurrection Remix-N v5.8.2 nougat ROM For Galaxy Note 3 SM-N900P. This device released with Android 4.4.2 TouchWiz UI but many users don’t like TouchWiz UI so then can install Resurrection Remix. Also, this ROM gives you an opportunity nougat experience. This ROM based on the Android 7.1.1 Nougat.

Resurrection Remix based on Cyanogenmod now Lineage OS, Resurrection Remix simple UI for daily usage, very smooth and optimized. Resurrection Remix can be installed via Custom recovery like TWRP and CWM so you need to install TWRP recovery on Galaxy Note 3. If you already installed recovery then let’s begin with the tutorial. Flash this ROM and enjoy the experience of nougat with more gaming, stability.

Resurrection Remix Features:-

Custom Navbar, Statusbar.
All Android Nougat Features.
Based On CM 14.1
CM privacy guard.
Performance Tweaks.
Advanced Reboot Menu.
Network Traffic Indicator.
Theme support.
Smooth Optimized.

Pre-requisites:-

Required Custom Recovery.
Backup Your Current ROM & all-important Data.
Need your device at least to 60% charge, as the process may take a while.
Download RR-N-v5.8.2-20170318-hltespr-Official.zip file and Gapps zip.
Read Instruction.

⇓⇓ Download Resurrection Remix-N v5.8.2 Nougat Rom For Galaxy Note 3 ⇓⇓

Guide To Install Custom ROM:-

Download “ RR-N-v5.8.2-20170318-hltespr-Official.zip ” and copy it to external memory.
Turn off your phone and enter recovery mode by Volume Down + Power Key at the same time.
Then ‘ wipe and format option ⇒ wipe data, system, cache and Dalvik cache ’ via recovery.
Back to recovery menu and click install.
Then navigate to the Rom.zip file, which you downloaded before.
Select ” RR-N-v5.8.2-20170318-hltespr-Official.zip ” file from the list to flash it.
Swipe for flashing.
Wait for processing complete.
After the process is done again flash Gapps file (same step) and wipe caches.
Then Reboot your device & enjoy.

Note: – The first time it’s takes 5-7 minutes to boot.

The post Resurrection Remix-N v5.8.2 Nougat ROM For Galaxy Note 3 SM-N900P appeared first on GizRom.com.

Lineage 14.1 for LeTV 1S_X500

Download Android 7.1 Nougat Lineage OS 14.1 For LeTV 1S X500

LeEco Le 1s was launched in February 2016. At this time LeTV 1S doesn’t receive nougat update from LeEco. The manufacturer has many popular in India and many other countries. That’s why many developers work on this device and someone builds android 7.1 nougat Lineage OS 14.1 for LeTV 1S X500. This device released with Android 5.0 lollipop with eUI interface but many users don’t like eUI so then can try Lineage OS. Also, this ROM gives you an opportunity to nougat experience. This ROM based on the Android 7.1.1 Nougat.

As you know that cynogenMod closed there all service like making much custom ROM and Nightly builds. However, a company purchased caynogenMod name is Lineage. It now rebranded as LineageOS.

Lineage OS 14.1 is the best custom ROM for gaming and performance. This ROM looks like simple UI (same as stock android) for daily usage, very smooth and optimized. Also, this custom ROM supports theme manager.

Lineage OS can be installed via Custom recovery like TWRP and CWM so you need to install TWRP recovery on Galaxy Note 3. If you already installed recovery then let’s begin with the tutorial. Flash this ROM and enjoy the experience of nougat with more gaming, performance experience.

Features:-

Based on CyanogenMod 14.1.
Smooth Optimized.
Theme support.
Really Good Battery Stats.
And much more.

Things To Do Before We Start:-

First, take total backup of your device.
Make sure your device rooted and installed TWRP recovery.
Need 50-60% charge for flashing in your device.
Download Lineage 14.1 ROM and Gapps from below “download” tab.
If you’re new in this process then please read the instruction before the process.

⇓⇓ Lineage OS 14.1 Nougat ROM For LeTV 1S X500 ⇓⇓

Guide To Install:-

Download “Lineage 14.1 ROM” and “Gapps” & copy it to external memory.
Turn off your phone and enter Recovery Mode by Volume Down + Power Key at the same time.
Then ‘ wipe and format option ⇒ wipe data, system, cache and Dalvik cache ’ Via Recovery.
Back to recovery Menu and click Install.
Then Navigate to the Rom.zip file, which you downloaded before.
Select Lineage 14.1 ROM file from the list to Flash It.
Swipe for flashing.
After the process is done again flash Gapps file (same step) and wipe caches.
Then Reboot your device & enjoy.

Note: – The first time it’s takes 5-7 minutes to boot.

Enjoy Lineage OS 14.1 nougat ROM for LeTV 1S X500, please share your experience by comment … 🙂 🙂 🙂

Source: xda

The post Download Android 7.1 Nougat Lineage OS 14.1 For LeTV 1S X500 appeared first on GizRom.com.

MK71.1-nx531j-***-NIGHTLY.zip

Official Android 7.1.1 MoKee Nougat ROM For Nubia Z11

ZTE Nubia Z11 was launched in June 2016. Till now ZTE does not say any this about nougat update. We always come with new Custom ROM for many smartphones. Today we have found Android 7.1.1 MoKee Nougat ROM For Nubia Z11. Xda developers “chenxingyu” share this ROM. This device released with Android 6.0.1 Marshmallow with nubia UI 4.0 interface but many users don’t like nubia UI so then can try MoKee ROM. This ROM looks like simple UI (same as stock android) Also, this ROM gives you an opportunity to nougat experience. This ROM based on the Android 7.1.1 Nougat.

MoKee is official, based on CyanogenMod 14.1 and CyanogenMod is the best custom ROM for any device. Also, this ROM added more features and more optimization. So, if you like this then download and flash it on your device.

MoKee is a custom ROM that’s why you can flash it via TWRP recovery. If you new to the process, then please follow the guide below. Flash this MoKee Nougat ROM For Nubia Z11 and enjoy the experience of nougat with new interface lets go to the instructions…

MoKee 7.1.1 Rom Details:-

Listview animation.
Some icons and own layouts.
Manager for Google services (you can only download necessary at MokeeCenter).
Boot animation own.
Information integrated into MokeeCenter.
Settings to add speed data network.
Intelligent control settings to configure the newer apps and others.
And much more.

Pre-requisites :-

Create a full backup of your phone data.
Need installed custom recovery ⇒ Guide here.
Your device at least to 50-60% charge for flashing.
Download MK71.1-nx531j-***-NIGHTLY.zip ROM file from below.
If you’re new in this process then please read the instruction before the process.

⇓⇓ Download MoKee ROM For Nubia Z11 ⇓⇓

Guide To Install:-

Download “ MK71.1-nx531j-***-NIGHTLY.zip ” & copy it to external memory.
Turn off your phone and enter Recovery Mode by Volume Down + Power Key at the same time.
Then ‘ wipe and format option ⇒ wipe data, system, cache and Dalvik cache ’ via recovery.
Back to recovery menu and click Install.
Then navigate to the Rom.zip file, which you downloaded before.
Select ” MK71.1-nx531j-***-NIGHTLY.zip ” file from the list to Flash It.
Swipe for flashing.
After the process is done Reboot your device & enjoy.

Note: – The first time it’s takes 5-7 minutes to boot.

Like Nubia Dev For Zte and Nubia Updates:- https://www.facebook.com/NubiaDev

Like, Share And Comment Bellow.

Source: xda

The post Official Android 7.1.1 MoKee Nougat ROM For Nubia Z11 appeared first on GizRom.com.

MK60.1-nx549j-201703211415-UNOFFICIAL.zip

Android 6.0.1 Marshmallow MoKee ROM For Nubia Z11 mini S NX549J

ZTE newly launched their new flagship device called nubia Z11 mini S. This device comes with Android 6.0 Marshmallow. Many Android users have been a fan of ZTE for quite a long time of its camera and build quality. Today we come with MoKee ROM for Nubia Z11 mini S NX549J to you. Nubia official forum member made this custom ROM for us, thanks to “S_Y_ resource group”.

Nubia Z11 mini S launched with a highly customized version of Google’s Android called Nubia UI 4.0. But everyone not likes this customized version of Android. Also, it gives you Google theme based, fully optimized, Android 6.0 Marshmallow based ROM. This ROM makes your phone more smooth and faster. MoKee based on CyanogenMod 13 and CyanogenMod is the best custom ROM. Also, this ROM added more features and change many logs. So, if you like this then install it on your device.

For install, this ROM needs a custom recovery and rooted device. If you try to install to first time then follow the guide below and going to install ROM. Flash this Marshmallow MoKee ROM for Nubia Z11 mini S NX549J and enjoy the experience of a new interface. Let’s go to the instructions…

MoKee 6.0.1 Rom Details:-

Listview animation.
Settings for the navigation bar.
Manager for Google services.
Settings to add speed data network.
Ringtones, alarms, notification, UI sounds are all different CyanogenMod.
Some icons and own layouts.
Settings for the StatusBar.
And much more.

Things To Do Before We Start:-

First, take total backup of your device.
Make sure your device rooted and installed TWRP recovery.
Need 50-60% charge for flashing in your device.
Download MK60.1-nx549j-201703211415-UNOFFICIAL.zip ROM file from below “download” tab.
Read Instruction carefully.

⇓⇓ Download MoKee ROM For Nubia Z11 mini S ⇓⇓

Install Custom ROM:-

Download “ MK60.1-nx549j-201703211415-UNOFFICIAL.zip ” & copy it to external memory.
Turn off your phone and enter Recovery Mode by Volume Down + Power Key at the same time.
Then ‘ wipe and format option ⇒ wipe data, system, cache and Dalvik cache ’ via recovery.
Back to recovery menu and click Install.
Then navigate to the Rom.zip file, which you downloaded before.
Select ” MK60.1-nx549j-201703211415-UNOFFICIAL.zip ” file from the list to Flash It.
Swipe for flashing.
After the process is done Reboot your device & enjoy.

Note: – The first time it’s takes 5-7 minutes to boot.

Like Nubia Dev For Zte and Nubia Updates:- https://www.facebook.com/NubiaDev

Comment Bellow if face any problem during flashing.

The post Android 6.0.1 Marshmallow MoKee ROM For Nubia Z11 mini S NX549J appeared first on GizRom.com.

nitya jana

Android 6.0.1 Marshmallow LineageOS 13 Rom For UMI SUPER

Umi super Phablet was launched in 2016 the Umi super released with Android 6.0 stock ui but many users want to change the UI. So they can install LineageOS. Here Android 6.0.1 Marshmallow LineageOS 13 Rom For UMI SUPER. This ROM based on the Android 6.0.1 Marshmallow developed by xda forum member joe2k01.

Lineage Os 13 based on Android 6.0 Marshmallow, Lineage Os simple ui for daily usage, very smooth and optimized. Lineage Os can be install via Custom recoveries like Twrp and cwm so you need to install Twrp recovery on UMI SUPER first you have to Unlock Bootloader and installs Twrp recovery UMI SUPER then you can install this rom. Let’s go to the guide how to Install Android 6.0.1 Marshmallow LineageOS 13 Rom On UMI SUPER.

LineageOS 13 Android 6.0.1:-

Based On Android 6.0.1.
Inbuilt customization.
Enable Or Disable Navigation Bar.
Enable Root.
Ram management is really good.
No signal drops and network issues.
All LineageOS Features.
And Much.

Working features:-

Camera(besides video recording issues)
Bluetooth
Wifi
Vibration
Flashlight
Rotation
Gps
Fingerprint scanner
Fm radio
New screen
Encrypting
Sd card
Notifications led
Left button
Basically everything besides bugs.
Doze
In-built root
Keyswitch app

Not Working:-

Google Camera fc
HDR gives fc
Video recording not working on Snapchat.
Audio over Bluetooth
CM Screen Recorder not working
Tethering

Pre-requisites :-

Backup Your Current ROM & Data.
Need Installed Custom Recovery ⇒ Here
Remove Finger Print and Storage Encryption.
Need Your Device At Least To 60% Charge, As The Process May Take A While.
Download Latest LineageOS 13 Build and Gapps Zip.
Read Instruction.

⇓⇓ Download LineageOS 13 Rom For UMI SUPER ⇓⇓

lineage-13.0-UNOFFICIAL / Mirror Link

Gapps (select ARM64 > 6.0 > Nano or Micro)

Guide To Install:-

Read Pre-requisites.
Download Latest LineageOS 13 Build and Gapps Zip & Copy It To SD-Card.
Turn Off Your Phone And Enter Recovery Mode By Volume Up+ Power Key At The Same Time.
In Recovery Go To ‘Wipe And Format Option ⇒ Wipe Data, Cache And Dalvik Cache’ Via Recovery.
In Recovery Main Menu Navigate To The ROM zip File, That You Downloaded Before.
Select Rom File From The List To Flash It.
Install Gapps in the same method.
Now Reboot Your Device & Enjoy.

Note: – First Time It’s Takes 7-10 Minutes To Boot.

Source : – XDA

You Might Also Like:-

[CUSTOM ROM] Android 6.0 Marshmallow LineageOS 13 Rom For Honor 6X

Android 6.0.1 MoKee Marshmallow ROM For Nubia Z11

Install Android 6.0.1 BLISS POP ROM For Lenovo Vibe C

The post [CUSTOM ROM] Android 6.0.1 Marshmallow LineageOS 13 Rom For UMI SUPER appeared first on GizRom.com.

Install B183 Huawei Mate 9 Firmware With Amazon Alexa [USA]

On this week Huawei sends a new update on Huawei Mate 9. The version of this latest nougat update is B183. Latest B183 nougat firmware is now available for Huawei Mate 9. We provide official full firmware with CUST file. Today we share with you B183 Huawei Mate 9 Firmware With Amazon Alexa for the USA variant device. Huawei had promised that the device would receive Amazon’s virtual assistant, Alexa, in a future update. As promised, Huawei gives Amazon Alexa for Huawei Mate 9 in this update. Let’s some talk about the device.

November 2016, Huawei launched Huawei Mate 9 in global smartphone market. The Huawei Mate 9 powered by 1.8GHz octa-core HiSilicon Kirin 960 processor. This device comes with 4 GB of RAM. This device has 64 GB of internal storage that can be expanded up to 256 GB. It has 5.9 inches IPS LCD capacitive touchscreen with 1080 x 1920 pixels resolution. This device lets you snap brilliant Dual 20 MP+12 MP rare camera and 8-megapixel front camera. It has a non-removable Li-Po 4000 mAh battery.

You may also like: Update EMUI 5.0 Huawei Mate 9 B176 Nougat Firmware

This update adds Amazon Alexa cloud-based voice service. Also, fixes some significant bugs and includes March security update. Many users do not get this update officially on their device, so if you want to update then install it in your device.

Here the guide and B183 firmware link for Huawei Mate 9 MHA-L29 USA version. So don’t wait if you want to use Amazon Alexa then just scroll down and follow the guide, …

Image source: Xda

Firmware Details:-

Android Version: – Nougat v7.0
UI Version: – Emotion UI 5.0
Firmware Versions: – B183
Huawei Mate 9: – MHA-L29
Release Date:- 23.Mar.2017
Firmware: – MHA-L29C567B183
Status: – Official
Region: – USA
Changelog: – Click here.

Note :-

This firmware work only Huawei Mate 9 MHA-L29 variant, do not try other version devices.

Preparation :-

At first, check your device model number.
Backup complete phone data like contacts, messages, and apps.
Your device at least needs To 60% charge for flashing.

⇓⇓ Download B183 Huawei Mate 9 Firmware ⇓⇓

Guide To Install Update:-

Download update.zip file.
Create a folder “dload” to the root of the SDcard.
Copy update.zip file in the “dload” folder.
Open dial pad type “ *#*# 2846579#*# * ”.
Select software upgrade > SDcard upgrade > confirm the installation.
Flashing will start. after flashing process did your phone automatic reboot.

You may also like: Install B156 Android 7.0 For Mate 9 Firmware MHA-L09

Enjoy via this update Amazon Alexa for Huawei Mate 9 device … 🙂 🙂 🙂

The post Install B183 Huawei Mate 9 Firmware With Amazon Alexa [USA] appeared first on GizRom.com.

Lineage 14.1 for Redmi_Note 4

Download Android 7.1 Nougat Lineage OS 14.1 For Redmi Note 4

Redmi Note 4 was launched in January 2017. Till now Redmi Note 4 doesn’t receive nougat update from Xiaomi. At a day Xiaomi one of the biggest brand in India and this device has many popular in India. That’s why many developers work on this device and someone builds android 7.1 nougat Lineage OS 14.1 for Redmi Note 4. This device released with Android 6.0 Marshmallow with MiUI interface but many users don’t like this type of highly optimized UI so then can try Lineage OS. This ROM looks like simple UI (same as stock android). Also, Lineage OS gives you an opportunity to nougat experience. This ROM based on the Android 7.1.1 Nougat.

As you know that cynogenMod closed there all service like making much custom ROM and Nightly builds. However, a company purchased caynogenMod name is Lineage. It now rebranded as LineageOS.

The start of the year Xiaomi launched Redmi Note4. The Redmi Note 4 is run 2GHz octa-core Qualcomm Snapdragon 625 processor and it comes with 3/4GB of RAM. Internal storage is 32/64 GB. It has 5.5 inches IPS LCD capacitive touchscreen, with a resolution of 1080 x 1920 pixels. This device has 13-megapixel rare camera and 5-megapixel front camera. It has a Non-removable Li-Po 4100 mAh battery.

Lineage OS 14.1 is the best custom ROM for performance, battery backup, and gaming. LineageOS is perfect for daily usage, very smooth and optimized. Also, this custom ROM supports theme manager, Audio FX that give you to change equalizer setting. Lineage OS can be installed via Custom recovery like TWRP and CWM so you need to install TWRP recovery on Redmi Note4. If you already installed recovery then let’s begin with the tutorial. Flash Lineage OS 14.1 for Redmi Note 4 and enjoy the experience of nougat with more stable performance.

Features of Lineage OS 14.1:-

Based on CyanogenMod 14.1.
RGB LED notification light.
Smooth Optimized.
Audio FX.
Theme support.
Good Battery Stats.
And much more.

You may like also: – Install Global Stable MIUI 8.1.15.0 ROM For Redmi Note 4

Requirements:-

First, take total backup of your device.
Make sure your device rooted and installed TWRP recovery.
Need 60-70% charge for flashing in your device.
Download Lineage 14.1 ROM and Gapps from below.
Read the instruction carefully.

⇓⇓ Lineage OS 14.1 Nougat ROM For Redmi Note 4 ⇓⇓

Guide To Install:-

Download “Lineage 14.1 ROM” and “Gapps” & copy it to external memory.
Turn off your phone and enter Recovery Mode by Volume Down + Power Key at the same time.
Then ‘ wipe and format option ⇒ wipe data, system, cache and Dalvik cache ’ via recovery.
Back to recovery menu and click Install.
Then navigate to the Lineage 14.1 ROM.zip file, which you downloaded before.
Select file and swipe for install.
After the process is done, reboot your device into recovery.
Then flash Gapps file (same step) and wipe caches.
Then Reboot your device & enjoy.

Note: – The first time it’s takes 5-7 minutes to boot.

Enjoy Lineage OS 14.1 nougat ROM for Redmi Note 4, if face any problem then comment below … 🙂 🙂 🙂

The post Download Android 7.1 Nougat Lineage OS 14.1 For Redmi Note 4 appeared first on GizRom.com.

RR-N-v5.8.2-20170312-CP8298_I00-UNOFFICIAL.zip

Resurrection Remix-N v5.8.2 Nougat ROM For Coolpad Note 3 Lite

Coolpad Note 3 Lite was launched in January 2016. The Coolpad Note 3 Lite doesn’t receive nougat update from Coolpad. The manufacturer has many popular in India. and much developer works on this device. So one developer builds Resurrection Remix-N v5.8.2 Nougat ROM For Coolpad Note 3 Lite. This device released with Android v5.1 lollipop cool UI 7 but many users don’t like cool UI, so they can install Resurrection Remix. Also, this ROM gives you an opportunity nougat experience. This ROM based on the Android 7.1.1 Nougat.

Coolpad released Coolpad Note 3 Lite smartphone with stable Android v5.1 (lollipop). The Coolpad Note 3 Lite powered by 1.3GHz quad-core MediaTek 6753 processor. It comes with 3GB of RAM. Internal storage is 16GB. It has 5.0 inches IPS LCD capacitive touchscreen, with a resolution of 720 x 1280 pixels. Coolpad Note 3 Lite lets you 13-megapixel back camera and 5-megapixel front camera. It has removable Li-Ion 2500 mAh battery.

Resurrection Remix based on Cyanogenmod now Lineage OS, Resurrection Remix simple UI for daily usage, very smooth and optimized. Resurrection Remix can be installed via Custom recoveries like TWRP and CWM. So your device must be rooted and installed TWRP recovery. If you already installed recovery then let’s begin with the tutorial. Flash this ROM and enjoy the experience of nougat.

Resurrection Remix Features:-

Based On CM 14.1
All Android Nougat Features.
Custom Navbar, Statusbar.
CM privacy guard.
Performance Tweaks.
Advanced Reboot Menu.
Network Traffic Indicator.
Theme support.
Android FX

Pre-requisites:-

Backup Your Current ROM & all-important Data.
Your device must be rooted.
Required Custom Recovery.
Need your device at least to 60% charge, as the process may take a while.
Download RR-N-v5.8.2-20170312-CP8298_I00-UNOFFICIAL.zip file and Gapps zip.
Read Instruction.

⇓⇓ Download Resurrection Remix-N v5.8.2 Nougat ROM For Coolpad Note 3 Lite ⇓⇓